Área de XRF / Produto / Detalhes

Phoenix / VFD -M

Mais Informações



Overview
The M series is a full size machine designed for high sample out put. The Phoenix uses a modular system of construction so if your analysis program calls for 60,000 or 1000 samples per annum there is a Phoenix model specifically for that job.
Samples are dissolved and mixed into a lithium borate flux at temperatures ranging from 800 to 1250°C (Typical fusion temperature is 1050°C). This is done over oxygen-enriched flames using specially designed burners. The sample is automatically poured into pre-heated moulds. The moulds are then retracted over separate cooling jets for precise control of cooling.
Find Platinum Labware for this machine

Download Data Sheet
Technical Specifications
Individual burner selection
Variable speed swirl action
Fully regulated air cooling (2 stage)
Reset at any time
Can be used at high altitude without modification separate mould heating and timing
Can heat moulds up to 180gm
Auto-lock crucible holders
Adjustable pour & mould delay
Individual burner manifold
Oxygen injection option
Pre melt option
Ammonium iodide injector option
Melt loss option
LOI option
See Data Sheet for further details

Alternative Models
PHOENIX 3000/M - 6 Burners - 3 Glass
Beads Produced Simultaneously
PHOENIX 4000/M - 8 Burners - 4 Glass
Beads Produced Simultaneously
PHOENIX 6000/M - 12 Burners - 6 Glass
Beads Produced Simultaneously



Overview
The M series is a full size machine designed for high sample out put. The Phoenix uses a modular system of construction so if your analysis program calls for 60,000 or 1000 samples per annum there is a Phoenix model specifically for that job.
Samples are dissolved and mixed into a lithium borate flux at temperatures ranging from 800 to 1250°C (Typical fusion temperature is 1050°C). This is done over oxygen-enriched flames using specially designed burners. The sample is automatically poured into pre-heated moulds. The moulds are then retracted over separate cooling jets for precise control of cooling.
Find Platinum Labware for this machine

Download Data Sheet
Technical Specifications
Individual burner selection
Variable speed swirl action
Fully regulated air cooling (2 stage)
Reset at any time
Can be used at high altitude without modification separate mould heating and timing
Can heat moulds up to 180gm
Auto-lock crucible holders
Adjustable pour & mould delay
Individual burner manifold
Oxygen injection option
Pre melt option
Ammonium iodide injector option
Melt loss option
LOI option
See Data Sheet for further details

Alternative Models
PHOENIX 3000/M - 6 Burners - 3 Glass
Beads Produced Simultaneously
PHOENIX 4000/M - 8 Burners - 4 Glass
Beads Produced Simultaneously
PHOENIX 6000/M - 12 Burners - 6 Glass
Beads Produced Simultaneously